Sun Joe 24V-SB10-LTE 24-Volt iON+ Cordless SharperBlade Stringless Lawn Trimmer Kit 10-Inch W/ 2.0-Ah Battery and Charger

User Manual - Page 8

For 24V-SB10-LTE.

PDF File Manual, 20 pages, Read Online | Download pdf file

24V-SB10-LTE photo
Loading ...
Loading ...
Loading ...
8
Unpacking
Carton Contents
Grass trimmer + edger
Safety guard
Auxiliary handle with knob and bolt
SharperBlade
mini trimmer blade
Trimmer plate (pre-assembled)
Grass blades (x10) (pre-assembled)
Storage compartment (pre-assembled)
Washer (pre-assembled)
Screw knob (pre-assembled)
iON+ 24V lithium-ion battery
iON+ 24V lithium-ion battery charger
Manuals with registration card
1. Carefully remove the cordless grass trimmer + edger and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the cordless grass
trimmer + edger. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations or save the packaging
for long-term product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suocation risk!
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
mWARNING! Before rst use, the battery requires at
least 1 hr 20 min charge time to be fully charged. When the
battery is at low capacity, recharge for 1 hr 20 min again before
resuming operation.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read o the
battery charge level from the LEDs of the battery indicator:
All 3 level monitoring LEDs are lit: Battery charge level
is high.
2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be working,
insert the battery into the charger and charge as needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
Charger Operation
m
WARNING! Charge only iON+ 24V lithium-ion battery
packs with its compatible iON+ 24V lithium-ion charger.
Other types of batteries may cause personal injury and
damage.
To reduce the risk of electric shock, do not allow water to ow
into the charger's AC/DC plug.
When to Charge the iON+ 24VBAT-LTE
Lithium-Ion Battery
NOTE: The iON+ 24VBAT-LTE lithium-ion battery packs do
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery pack before placing it into the charger.
Use the battery charge indicator lights to determine when to
charge your iON+ 24VBAT-LTE lithium-ion battery pack.
You can "top-o" your battery pack's charge before starting
a big job or after a long day of use.
Charging the Battery
1. Press the push lock buttons on the battery to pull the
battery pack out of the equipment (Fig. 1).
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light IndicatorsLights
Loading ...
Loading ...
Loading ...