1. Home
  2. Intex
  3. Intex 57135EP User Manual
  4. Page 5

Intex 57135EP Dinoland Inflatable Play Center

User Manual - Page 5

For 57135EP.

PDF File Manual, 6 pages, Read Online | Download pdf file

57135EP photo
Loading ...
Loading ...
Loading ...
(145) GENERIC TYPE-A INFLATABLE MANUAL ENGLISH 4.875” X 6.5” 08/10/2016
145
SAVE THESE INSTRUCTIONS
Instructions for products with water sprayer (vary from models):
1.
Locatethesprayerconnector(A).
2.
Attachedthesprayerconnector(A)toagardenhose
(B)bythreadingthesprayercouplingontothe
gardenhose.Tightensecurely.
3.
Turnthewateronslowlyatfirsttoallowwaterto
graduallyfillin.Thenadjustthesprayasdesired.
POOL MAINTENANCE & DRAINAGE
Inspect the pool at the beginning of each use for holes, wear and tear and other
damages. Never use a damaged pool.
Water can be easily contaminated. Change the water of the pool frequently (particularly in hot
weather) or when noticeably contaminated.
How to Drain Your Pool and Long Term Storage:
1.
Adultsshalldrainandstorethepool.Checklocalregulationsforspecificdirections
regarding disposal of swimming pool water.
2.
Remove all accessories, toys, garden hose, etc from the pool.
3.
Openthedrainvalvecap(varyfrommodels)
4.
Carefullyopentheinflationvalvecapsand/orexhaustvalvecapstodeflatetheair
chambers, and slowly push the sidewall inward and down to speed up the drainage of
the pool. Slowly lift one side of the pool to drain out the remaining standing water.
5.
Re-insert all valve caps afterwards for storage.
6.
Be sure pool and all parts are completely dry before folding, let it sit under the sun for
anhour(seedrawing1).Sprinkletalcumpowdertopreventvinylfromstickingtogether
and to absorb any water you may have missed.
7.
Create a square shape. Starting at one side, fold one-sixth of liner in on itself twice.
Dothesameontheoppositeside(seedrawing2.1&2.2).
MAX
MAX
a. b.
c.
NOTE:
Alldrawingsforillustrationpurposeonly.Maynotreflectactualproduct.Nottoscale.
6.
Filltheproductwithairuntilthesurfaceisfirmtothetouch.Ifthereisany
straining at the seams, the product is over-inflated. If any seam begins to strain,
immediately stop the inflation and release air to reduce the pressure until signs
of stress on the seam are gone. Do not over-inflate or use high pressure air
compressor since it may result in seam leaks.
7.
Closeandrecessallinflationvalvecap(s)securelybypushingdownfirmlyonit.
8.
Dependingonthetype/modeloftheinflatablepool,slowlyfillwithwater:
a.
just below the horizontal line indicator printed on the inside of the pool’s wall, or
b.
just below the over-flow holes indicator on the inside of the pool’s wall, or
c.
just below the first top air chamber ring.
Page 5
Loading ...