Loading ...
Loading ...
Loading ...
CONTROL PANEL FUNCTIONS
3
7
NOTICE
When this heat function is used for the first time, a slight odor may be present.
This is normal and should not occur again unless the heater is not used for an
extended period of time.
½
CONTROLS FUNCTION
Power
Press once to turn the power ON.
Press again to turn the power OFF.
Power Indicator
When power is ON, red light will glow.
Flame +/-
Press Flame (+/-) Button to desired flame brightness.
6 options.
Timer +/-
Press Timer (+) once to increase timer setting by
hour increments. Maximum timer setting is 7½ hours.
Indicator light will illuminate.
Press Timer (-) once to decrease timer setting by ½
hour increments.
Heater
Press the Heat Button once, 750W (LOW HEAT)
heater turns on and the fan starts to blow warm air.
Press the Heat Button again, 1,500W (HIGH HEAT)
heater turns on and blows hot air.
Press the Heat Button again and heater turns OFF.
The fan will continue to blow to allow heater to cool
down, and then turns off.
Thermostat
Control
Heater must be ON either LOW or HIGH heat for the
thermostat function to operate. The heat output is
controlled by the Thermostat Control. Set the
Thermostat Control to the maximum position initially.
When the room reaches the desired temperature,
reduce the setting by slowly turning the thermostat knob
counterclockwise until the heater will click and turn off.
The heater will then maintain the room temperature at
the desired level.
POWER
TIMER
FLAME
-
-
+
+
HEATER
1/2h
1h
2h
4h
1
2
3
4
5
6
7
8
9
Thermostat
Loading ...
Loading ...
Loading ...