Loading ...
Loading ...
Loading ...
2-56 Instruments and controls
. The timing of switching the low
beam and high beam may
change under the following situa-
tions.
— The brightness of the head-
lights of the oncoming vehicle
or leading vehicle.
— The movement and direction
of the oncoming vehicle and
the leading vehicle.
— When only one light on the
oncoming vehicle or the lead-
ing vehicle is illuminated.
— When the oncoming vehicle or
the leading vehicle is a two-
wheeled vehicle.
— Road conditions (incline,
curve, the road surface, etc.).
— The number of passengers
and the amount of cargo.
JVI1621X
Type A
WAC0414X
Type B
High beam assist operations:
To activate the high beam assist system,
turn the headlight switch to the AUTO
position
or position (Type B) and
push the lever forward
(high beam
position). The high beam assist indicator
light in the meter will illuminate while the
headlights are turned on.
If the high beam assist indicator light
does not illuminate in the above condi-
tion, it may indicate that the system is not
functioning properly. It is recommended
you have the system checked by a
NISSAN dealer.
When the vehicle speed lowers to less
than approximately 13 MPH (20 km/h), the
headlight remains the low beam.
To turn off the high beam assist system,
turn the headlight switch to the
position or select the low beam position
by placing the lever in the neutral posi-
tion.
Loading ...
Loading ...
Loading ...