Loading ...
Loading ...
Loading ...
7
Setup
Getting the Projector Ready
To set up the projector:
1. Power up the projector by flipping Projector Deluxe’s Power Switch to the on position and
then pressing the Projector button.
2. Position Projector Deluxe in front of your projection screen, making sure that the lens is
facing the screen. The closer that Projector Deluxe is to the projection screen, the smaller
the projected video will be. You’ll get a clear picture when the size of the projected video is
between 2.5 feet and 12.5 feet.
Note: The lens should be at the same height as the center of the projected video (as
pictured below).
3. Focus the lens as needed by turning the Focus Ring until you achieve a clear picture.
Some tips on using the projector:
• The projector will work best when used in a
dimly lit environment.
• White is the ideal color for the surface of the
projection screen.
• The lens should be perpendicular to the
projection screen. If Projector Deluxe is not
sitting on a level surface, you can correct the
angle of the lens by using the Keystone
Adjustment or by raising/lowering the
adjustable foot on the bottom of the unit.
• When you are done using the projector,
fasten the included lens cap to the lens. If
you are having trouble, use the Focus Ring
to make sure that the lens is extended
enough in order for the lens cap to latch
onto it.
Projector
Deluxe
Lens
Projection Screen
Projector Deluxe
Bottom Panel
Adjustable Foot
Loading ...
Loading ...
Loading ...