Loading ...
Loading ...
Loading ...
4 5
Included Items
1 x Fabric Shaver
1 x Protection Cap
2 x Replaceable Cutting Blades
1 x Cleaning Brush
1 x Storage Bag
1 x Instructional Manual
Before using the fabric shaver for the first time, check
the package contents to ensure all parts are free of
visible damage.
Handling and Operation
Inserting Batteries
Press the tabs on the battery compartment cover and
push down. Insert 2 AA batteries (not included), paying
attention to the polarity. Put the battery compartment
cover back on and the shaver will be ready for use.
Testing
• The fabric shaver can damage delicate fabrics and
very soft materials such as angora. Before removing
fluff, always test on a small area of the fabric that
is not publicly visible to confirm the speed level is
appropriate for the fabric.
• Turn the transparent adjustable spacer to the level
“Thick” and then push the On/Off/Speed Switch to
Speed Level 1. To test the most suitable speed for
your fabrics and avoid damaging the garment, it is
recommended to use Speed Level 1 first, then switch
up to Speed Level 2.
Shaving Off Fluff
1. Put the garment on a flat surface, such as an ironing
board. Make sure the surface has no wrinkles.
Otherwise, the garment may be damaged.
2. Turn the spacer to the desired level or remove it
completely (see the "Removing/Attaching the Spacer"
section of this manual).
• “Thick” is for large bobbles and coarse textiles; 5mm-
length distance from the cutting blades.
• “Thin” is for small lint/bobbles and fine textiles; 3mm-
length distance from the cutting blades.
• Removing the spacer is only for very fine lint; virtually
no spacing to the cutting blades.
3. Push the On/Off/Speed Switch to the required speed
level.
4. Guide the shaver foil lightly over the material. The fluff
and bobbles will be shaved off and collected in the
fluff collector.
5. To turn off the shaver, push the On/Off/Speed Switch
back to Speed Level 0.
Note:
• Empty the fluff collector regularly. The fluff collector
should never be more than 3/4 full. An overfilled
fluff collector will slow the cutting blades no matter
the amount of battery power left.
Loading ...
Loading ...