Loading ...
Loading ...
Loading ...
IMPORTANT
Be sure to replace the Quick Spout Pour Cap to
ensure proper suction.
IMPORTANT
For full suction, it is important that the Dirty Water
Tank is properly secured before cleaning.
IMPORTANT
Regarding Dirty Water Tank Lid: For full suction it is
important that the Dirty Water Tank Lid is securely
in place. If misplaced, poor to no suction will result
(see Figs. E,F, G).
!!
!!
!!
12
Continue using dry strokes until little
water is visible passing through the
nozzle.
NOTE: Empty Dirty Water Tank when the
motor sound becomes higher pitched and
there is a loss in suction (see “Automatic
shut-off”). You will also see the oat rise
and shut off suction at the same time.
For best results, Hoover recommends
rinsing carpet with water only. This
removes residual carpet cleaning solution.
Fill Solution Tank with water and repeat.
For heavily soiled areas, repeat. Avoid
saturating carpet.
NOTE: It is best to alternate wet and dry
strokes as described above. See cleaning
modes section to choose best cleaning
mode for desired results.
CAUTION
Do not clean over oor electrical
outlets. Water will drip from the
brushes and underside of the product
after use and may puddle. To avoid
damage to wood and laminate ooring
and to avoid potential slip hazard,
after use (a) do not leave the product
on wood and laminate surfaces and
move to a hard surface and (b) place
unit on an absorbent material
(such as a towel) to soak up drips.
!!
Loading ...
Loading ...
Loading ...