Loading ...
Loading ...
Loading ...
WARNING Do not use the
product if the fluff filter is not in
position or is
WARNING Where the hot
surface symbol is located
the temperature rise
.
cleaning
the appliance.
.
the
machine.
see energy label.
damaged; fluff
could be ignited.
The tumble dryer is not to be
used if industrial chemicals have
been used for cleaning.
WARNING: Never stop a tumble
dryer before the end of the
drying cycle unless all items are
quickly removed and spread out
so that the heat is dissipated.
during
operation of the tumble dryer
may be in excess of 60 degrees
C.
Remove the plug from the
electricity supply Always
remove the plug before
Do not continue to use this
machine if it appears to be
faulty
Lint and fluff must not be
allowed to collect on the floor
around the outside of
The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
Maximum load drying weight:
Installation
Do not use adapters, multiple
connectors and/or extensions.
Never install the dryer against
curtains and be sure to prevent
items from falling or collecting
behind the dryer.
The appliance must not be
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer.
4
●
●
●
●
●
●
●
●
●
●
●
●
Important:
Caution:
During transport
ensure that the dryer is in an
upright position, if it's necessary
you can only flip in the side shown;
If the product is in
different side, wait at least 4 hours
before switching on so that the oil
c a n f l o w b a c k i n t o t h e
compressor. Failure to do this
could result in damage to the
compressor.
Loading ...
Loading ...
Loading ...