Loading ...
Loading ...
Loading ...
6
OPERATING INSTRUCTIONS
Status Window
The CLEAN light will come on at the end of the
cycle and remains on until the door is opened.
When the SANITIZE option is selected, and the
criteria is met, the SANITIZED light will glow
and remain on until the door is opened. If the
dishwasher did not properly sanitize the dishes,
the light will not come on. This can happen
if the cycle is interrupted or if incoming water
temperature is below 120
0
F.
1-24................. Number of delay start
hours. The last hour
will count down in
minutes.
CL.................... Close dishwasher
door. The status
indicator lights will
also fl ash to indicate
current cycle status.
MINUTES.......... Number of minutes
left in cycle (1-99).
time counts below 99.
and remain on until
If cycle is longer than
99 minutes, a small
light will appear in
L0-L6................. Level of Rinse Aid
dosage.
Status Indicator Lights
The WASHING Light comes on at the beginning of
cycle and remains on until end of cycle.
Error Codes
Displayed
Error Code*
Problem Solution
i10 A low fi ll has been
detected.
Look for a pinched water supply line, or water shutoff is
not completely opened.
i20;
i40;
iF0
Clogged fi lters or a
restricted drain line
has been detected.
Check and clean both fi lters and sump area and check
for a pinched or blocked drain hose. If the drain line is
attached to a disposer, check that the knockout plug has
been removed.
i30
A leak or overfl ow
of water has been
detected in the
bottom pan.
Look for loose connections at the water inlet valve and
ensure the unit is properly leveled.
i50 A problem has been
detected with the
drain or wash motor.
i60 A problem has been
detected with the
water heating system.
iC0 A problem has been
detected with the
electronic control
system.
Pressing the cancel button or turning power off at the
breaker for 5 min. should clear this error code and the
unit can be restarted.
If this does not resolve the problem, service
will need to be called.
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for
5 min. does not resolve the problem, contact the Frigidaire Customer Care Center at 1-800-944-
9044.
Loading ...
Loading ...
Loading ...