Loading ...
Loading ...
Loading ...
English - 31
ADAPTiQ
®
audio calibration error messages
Listen to the voice prompts for the following error messages:
Error
message
Problem What to do
1 The microphone on the ADAPTiQ
headset cannot detect sound.
• Secure all speaker cables.
• Ensure the microphone opening on the
top of ADAPTiQ headset is
not blocked.
• Your ADAPTiQ headset may be
damaged. Call Bose
®
customer service
for replacement parts. Refer to the
contact sheet in the carton.
2 The room is too loud. Restart the ADAPTiQ audio calibration
when the room is quiet.
3 The ADAPTiQ headset is too
close to the speakers.
Move the ADAPTiQ headset farther away
from the speakers.
4 The listening locations are
too similar.
Move 1 - 2 ft. (.3 - .6 m) away from your
previous listening location.
5 The ADAPTiQ headset cannot
take measurements due to
movement.
Hold your head still.
After correcting your problem, you must restart the ADAPTiQ audio calibration
(see page 19).
If you hear a different error message, call Bose customer service for further
instructions. Refer to the contact sheet in the carton.
Factory reset the system
To troubleshoot problems, reset the System menu and ADAPTiQ
®
to the
factory settings.
1. Press
on the remote control.
2. Press
until 16 FACTORY RESET appears on the display.
3. Press 5.
The system resets.
4. Run the ADAPTiQ audio calibration
(see page 19).
Care and Maintenance
Loading ...
Loading ...
Loading ...