Loading ...
Loading ...
Loading ...
OPERATION
Remove all packaging before use.
Control Panel (See also ‘Operating Instructions’ below)
As shown in the photo below you will see the control panel in the right side of
the heater.
Fig 6
1 Power switch 2. Heat control button 3. Flame control button
4. Heater LED 5. Power LED
Operating by manual
Plug the heater in to a suitable main outlet (see rating label on unit for power
requirements).
1) “Power Switch ON/OFF”
Set this switch to position “I“ to turn the product ON. Setting it to “O” to turn
the product OFF. Turn on the fireplace the Power LED will be lighten.
2) “Heat control button”
Push the “HEAT” button to cycle through as bellow
HIGH heater work with 1500W “HEATER” LED for RED
LOW heater work with 750W “HEATER” LED for Blue
TEMP “HEATER” LED for Purple
Adjusting to auto control by room temperature , the heater turns on and work
with 1500W when room temperature is below 22°C, the heater turns on
and work with 750W when room temperature is below 25°C and above22°C ,
the heater will turn off when the room temperature is above 25°C.
3) “Flame control button”
Push the FLAME control button to adjust the flame height and ember bed
brightness. Press and release the FLAME control button to cycle through
LO,MED, HI and OFF.
Loading ...
Loading ...