Loading ...
Loading ...
Loading ...
7
1. Mark faucet and drain hole location
• Place sink in desired location on countertop and mark drain hole and
faucet hole centerline with a pencil
2. Drill countertop
• Cut the drain opening in the countertop by carefully placing the 4”
hole saw on the area marked by pencil
NOTE: Make sure clearance is suitable for backsplash, faucet, and sink
plumbing
NOTE: Please allow a minimum of 4.5” from wall to edge of sink for faucet
placement clearance
NOTE: For model numbers KCV-142 and KCV-150, faucet hole location should be
measured from center of drain hole to center of faucet hole on sink
2”
2 1/2”
2”
2 1/2”
Loading ...
Loading ...
Loading ...