Loading ...
Loading ...
Loading ...
.21.
INSTALLATION
MPORTANT: Before installation and usage read all the instructions and
make sure that the voltage (V) and the frequency (Hz) indicated on the
rating plate are exactly the same as the voltage and frequency in your
home. The rating plate can be found on the front left edge of the inside of
the Wine Cooler.
The manufacturer declines all responsibility in the event of the installer
failing to observe all the accident prevention regulations in force, which
are necessary for normal use and the regular operation of the electric
system.
Electrical Connection
YOUR Wine Cooler IS INTENDED FOR FITTED AND
PERMANENT INSTALLATION.
We recommend that the appliance is connected by a
qualied electrician, who is a member of the N.I.C.E.I.C.
and who will comply with the I.E.E. and local regulations.
Positioning
o It is advisable that your appliance is only installed in a location where
the ambient temperature of the room, corresponds with the climate
classification that is stated on the rating plate of your appliance. Your
appliance may not function correctly if the ambient temperature falls
outside of the following ranges.
Climate classication Appropriate ambient temperature
SN 10 - 32 °C (50
ºF-90ºF)
N 16 - 32 °C (61
ºF-90ºF)
ST 16 - 38 °C (61
ºF-100ºF)
T 16 - 43 °C (61
ºF-109ºF)
o Positioning the appliance requires two people in order to avoid injuries or
damage to the appliance.
o Your appliance should not be located in direct sunlight or exposed to
continuous heat or extremes of temperature (e.g. next to a radiator or
boiler). If this is not feasible, then you should install an insulation plate
between the appliance and the adjacent heat source.
o You should check whether there is an electrical socket available, which
will be accessible after your appliance is installed.
o Place the appliance atly and rmly on a solid base.
Loading ...
Loading ...
Loading ...