Loading ...
Loading ...
Loading ...
(368,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
& Electronic Parking Brake
s07ap03
1) Parking brake switch
2) Indicator light
3) Release the electronic parking brake
4) Apply the electronic parking brake
WARNING
. Before exiting the vehicle, make
sure that you turn off the engine.
Otherwise, the parking brake may
be released and an accident may
occur.
. If the brake system warning light
turns on, the electronic parking
brake system may be malfunc-
tioning. Immediately stop your
vehicle in a safe location, use tire
stops under the tires to prevent
the vehicle from moving and
contact your SUBARU dealer.
. If the electronic parking brake is
operated under the following
conditions, the electronic park-
ing brake indicator light may
flash.
– The brake is overheated.
– The vehicle is on a steep
slope.
In such cases, the vehicle may
start to move which may lead to
an accident. Always use the tire
stops.
CAUTION
. When the electronic parking
brake cannot be applied due to a
malfunction, contact your
SUBARU dealer immediately for
an inspection. If you have to park
your vehicle in such conditions,
perform the following procedure.
– Stop your vehicle in a flat
location.
– Shift the select lever in the “P”
position. When the select le-
ver cannot be shifted into the
“P” position, you must release
shift lock. Refer to “Shift Lock
Function” FP349.
– Use tire stops under the tires
to prevent the vehicle from
moving.
. Never drive with the parking
brake applied. Doing so will
cause unnecessary brake pad
wear. Before driving off, always
make sure that the parking brake
has been released and the brake
system warning light has turned
off.
. The braking power of the electro-
nic parking brake may not be
sufficient when strong braking
power is needed (e.g., when park-
ing on a steep slope while towing
a trailer (Outback)).
Your vehicle is equipped with an electronic
parking brake. You can apply/release the
parking brake by operating the parking
brake switch.
To apply: Depress the brake pedal and
pull up the parking brake switch.
To release: Press the parking brake
switch firmly while the ignition switch is in
the “ON” position and the brake pedal is
depressed.
Parking Your Vehicle
366
Loading ...
Loading ...
Loading ...