Loading ...
Loading ...
Loading ...
30
RÉGLAGE INITIAL
NE BRANCHEZ PAS L’INFUSEUR AVANT L’ÉTAPE 5; VOUS
RISQUERIEZ D’ENDOMMAGER L’APPAREIL DE MANIÈRE
PERMANENTE.
Il faut 2 carafes pleines d’eau froide pour remplir le réservoir interne d’eau chaude et pour
préparer votre appareil. Suivez les étapes de réglage initial décrites à la page suivante.
7
1. SLIDE THE EMPTY BREW
FUNNEL INTO THE
FUNNEL RAILS
2. FILL CARAFE WITH WATER
• Pour water into the
coffee maker
• Position carafe on the
warmer plate
• Close the lid
• Wait 4 minutes
3. REPEAT STEP 2
4. YOU HAVE FILLED THE TANK
• Wait until the water stops
fl owing into the carafe
• Then pour out the water
from the carafe
• Reposition the carafe on
the warmer plate
5. PLUG IN COFFEE MAKER
6. TURN COFFEE MAKER ON
• Press the tank power switch
on the side of the base to
the ON position
• Wait 15 minutes for the
water to heat
• Keep the tank switch on for
everyday use
(If the machine is not going to be
used for 4 or more days, turn it off.)
Please see the following section
for brewing instructions.
IMPORTANT: DO NOT PLUG IN
COFFEE MAKER UNTIL STEP 5.
53883.0002 A Speed Brew Manual 16in x 5.5in.indd Spread 7 of 18 - Pages(30, 7) 5/4/18 1:05 PM
Loading ...
Loading ...
Loading ...