Loading ...
Loading ...
Loading ...
10 English
4. Before You Start
• Unpack the carton carefully and keep all the packing materials unl you
ensure that the product is complete and working properly.
• Remove all packaging materials and foils. Retain them for later use. Check
that the appliance has been delivered completely and is in proper condion.
• Wipe the appliance with a damp cloth completely and allow it to dry com-
pletely.
5. Inial use
Inserng/replacing the baeries
1. To change the baeries, open the baery compartment at the top of the
appliance by unscrewing it.
2. If you have already inserted baeries, remove the old baeries and insert
two suitable new 1.5V AA baeries according to the correct polarity (+/-).
Pay aenon to the small scker inside the baery compartment and insert
the baeries accordingly.
3. Close the baery compartment by placing the baery compartment cover
and ghtening the screws.
Frothing milk
1. Fill the milk to be frothed in a tall container. Make sure that the container is
not lled by more than a third.
2. Immerse the whisk into the container unl it almost touches the base.
3. Turn on the appliance by sliding the "ON/OFF" switch to the "ON" posion.
4. Make slow circular moons unl the desired degree of frothing is reached.
Move the beater slowly and evenly up and down during the process. The
whisk should always remain in the milk.
5. Turn o the appliance by sliding the "ON/OFF" switch to the "OFF" posion.
6. Remove the beater from the milk once it stops.
7. Clean the appliance as described under "Cleaning and care".
• We recommend the use of milk with at least 3% fat content.
• For a beer result, heat the milk before frothing. Please note that the milk must not
be warmer than 70°C.
Loading ...
Loading ...
Loading ...