Loading ...
Loading ...
Loading ...
6-Quart Emeril Lagasse AirFryer Pro
™
9
Rotisserie Shaft & Skewer Racks
1. Place the two Skewer Racks at each end of the
Rotisserie Shaft. Make sure the Set Screws are on
the outer side of the Rotisserie Shaft (FIG. E).
2. Slightly tighten the Set Screws. Do not overtighten
because you may need to adjust the tightness after
you insert the Skewers.
3. The Rotisserie Shaft can be used alone or with
the Skewers.
Rotisserie Spit Assembly
& Insertion
1. Slide a Skewer into an open slot on the Skewer Rack
with the clip facing toward the Rotisserie Shaft.
2. Guide the sharp end of the Skewer through the hole
on the opposite Skewer Rack and push the clip
through the hole near the slot until the Skewer is
secure (FIG. F).
3. Repeat steps 1–2 uniformly around the Skewer Rack.
Ensure the Skewers are evenly spaced (FIG. G).
4. Tighten the Set Screws to make sure they are secure.
5. Use caution while inserting the Spit into the Unit
to prevent getting poked by the Skewer ends.
6. Open the door of the Unit. Slide the Rotisserie Spit
onto the rails in the center of the Unit.
7. Insert the shaft attached to the left side of the
Rotisserie Spit into the Rotisserie Socket on the left
side of the Unit. Then, insert the shaft on the right
side of the Rotisserie Spit into the right side of the
Unit. Ensure that the Round Basket's shaft is secure
inside the Rotisserie Socket.
FIG. F
FIG. G
FIG. E
Using the Accessories
Loading ...
Loading ...
Loading ...