Loading ...
Loading ...
Loading ...
When the SET- switch is pushed under the
following conditions, the ProPILOT Assist
system cannot be set and the set vehicle
speed indicator
O
1
blinks for approxi-
mately 2 seconds:
• When traveling below 20 mph (32 km/h)
and the vehicle ahead is not detected
• When the shift lever is not in the D (Drive)
position or B mode
• When the parking brake is applied
• When the brakes are operated by the
driver
• When the Vehicle Dynamic Control (VDC)
system is off. For additional information,
see “Vehicle Dynamic Control (VDC) sys-
tem” (P. 5-164).
• When the VDC system (including the trac-
tion control system) is operating
• When a wheel is slipping
• When any door is open
• When the driver’s seat belt is not fastened
How to change the set vehicle
speed
The set vehicle speed can be adjusted.
To change to a faster cruising speed:
• Push and hold the RES+ switch. The set
vehicle speed increases by approxi-
mately 5 mph (5 km/h).
• Push, then quickly release, the RES+
switch. Each time you do this, the set
speed increases by approximately 1 mph
(1 km/h).
LSD4115 LSD3019
Starting and driving 5-99
Loading ...
Loading ...
Loading ...