Loading ...
Loading ...
Loading ...
7
cold, it automatically starts a Hot/Cold Pack
Delay, suspending charging until the battery
has normalized. After this happens, the
charger automatically switches to the Pack
Charging mode. This feature ensures
maximum battery life. The red LED flashes in
the pattern indicated on the label when the
hot / cold pack delay is detected.
LEAVING THE BATTERY IN THE CHARGER
The charger and battery pack can be left
connected with the green LED glowing
indefinitely. The charger will keep the
battery pack fresh and fully charged.
IMPORTANT CHARGING NOTES
1. Longest life and best performance
can be obtained if the battery pack is
charged when the air temperature is
between 65°F and 75°F (18°- 24°C).
DO NOT charge the battery pack in an
air temperature below +40°F (+4.5°C),
or above +105°F (+40.5°C). This is
important and will prevent serious
damage to the battery pack.
2. The charger and battery pack may
become warm to touch while charging.
This is a normal condition, and does
not indicate a problem. To facilitate the
cooling of the battery pack after use,
avoid placing the charger or battery pack
in a warm environment such as in a
metal shed, or an uninsulated trailer.
3. If the battery pack does not charge properly:
a. Check current at receptacle by
plugging in a lamp or other appliance
b. Check to see if receptacle is
connected to a light switch which turns
power off when you turn out the lights.
c. Move charger and battery pack to a
location where the surrounding air
temperature is approximately 65°F -
75°F (18°- 24°C).
d. If charging problems persist, take
the tool, battery pack and charger to
your local service center.
4. The battery pack should be recharged
when it fails to produce sufficient power on
jobs which were easily done previously.
DO NOT CONTINUE to use under these
conditions. Follow the charging procedure.
You may also charge a partially used pack
whenever you desire with no adverse
affect on the battery pack.
5. Foreign materials of a conductive nature
such as, but not limited to, steel wool,
aluminum foil, or any buildup of metallic
particles should be kept away from
charger cavities. Always unplug the
charger from the power supply when there
is no battery pack in the cavity. Unplug
charger before attempting to clean.
6. Do not freeze or immerse charger in
water or any other liquid.
WARNING: Shock hazard. Do not
allow any liquid to get inside charger. Never
attempt to open the battery pack for any
reason. If the plastic housing of the battery
pack breaks or cracks, return to a service
center for recycling.
USING Bluetooth
®
BATTERY
This battery pack is capable of connecting
with mobile devices that support Bluetooth
®
Smart (or Bluetooth
®
4.0) technology.
To see if your mobile device is compatible,
visit: http://www.bluetooth.com/Pages/
Bluetooth-Smart-Devices-List.aspx
BLACK+DECKER SMARTECH
TM
is an
optional application for your smart device
(such as a smart phone or tablet) that can
connect and control BLACK+DECKER
SMARTECH
TM
products that are specifically
marked with the Bluetooth
®
Smart logo*.
GETTING STARTED WITH SMARTECH
TM
NOTE: The SMARTECH
TM
App is governed
by separate terms and conditions available
for viewing through the mobile application.
Step 1: Download the BLACK+DECKER
SMARTECH
TM
application at:
Step 2: Follow the instructions in the app to
create your SMARTECH
TM
account.
Step 3:
To connect your battery pack with
the BLACK+DECKER SmarTechTM
app, ensure your device’s
Bluetooth
®
is on, then go to the “My
Tools” screen in the app. Press the
“+” symbol to add the battery. You
will then be prompted to give the
product an individual name.
Step 4:
To activate the pairing process,
press the USB on/off button (1).
It will beep when pressed. Hold
the button for 5 seconds, or until it
beeps again, to complete pairing.
Step 5:
Once the connection is established,
you will be asked if you would like
to pair as well as confirm that you
would like to register the product on
your blackanddecker.com account.
Pair the the battery and it will then
be added to the “My Tools” screen
in the app.
For more information on BLACK+DECKER
SMARTECH
TM
functionality and features,
please call 1-800-544-6986, visit www.
blackanddecker.com or view the FAQ
page and help screens located inside the
mobile application.
Loading ...
Loading ...
Loading ...