Loading ...
Loading ...
Loading ...
ENGLISH
8
Fig. C
9
Trigger Switch & Forward/Reverse Button
(Fig. D)
• The drill is turned ON and OFF by pulling and releasing
the trigger switch
1
. The farther the trigger is
depressed, the higher the speed of the drill.
• A forward/reverse control button
2
determines the
rotational direction of the tool and also serves as a lock
off button.
• To select forward rotation, release the trigger switch and
depress the forward/reverse control button on the right
side of the tool.
• To select reverse, depress the forward/reverse control
button on the left side of the tool.
• The center position of the control button locks the tool
in the off position. When changing the position of the
control button, be sure the trigger is released.
Fig. D
1
2
Adjusting Torque Control (Fig. A)
This tool is fitted with a torque adjustment collar
3
to select
the operating mode and to set the torque for tightening
screws. Large screws and hard workpiece materials
require a higher torque setting than small screws and soft
workpiecematerials.
Speed Selector (Fig. E, F)
The speed selector feature of your drill allows you to shift
gears for greater versatility.
• To select low speed, high torque setting (position 1),
turn tool off and permit to stop. Slide speed selector
4
away from the chuck.
• To select the high speed, low torque setting (position2),
turn tool off and permit to stop. Slide speed selector
back toward the chuck.
NOTE: Do not change gears when tool is running. If you are
having trouble changing gears, make sure that the speed
selector is either completely pushed forward or completely
pushed back.
Fig.E
4
Fig.F
4
LED Work Light (Fig. A)
CAUTION: Do not stare into worklight. Serious eye
injury could result.
When drill driver is activated by pulling the trigger
switch
1
, the integrated LED work light
8
will
automatically illuminate the work area.
NOTE: The work light is for lighting the immediate work
surface and is not intended to be used as a flashlight.
Loading ...
Loading ...
Loading ...