Loading ...
Loading ...
Loading ...
AUS
99
Wash cycles and options
Wash options
! If the selected option is not compatible with the selected
wash cycle, this incompatibility will be signalled by the
flashing of the indicator light and a sound alert
(3 beeps); the option will not be activated.
! If the selected option is not compatible with another option that
has been selected previously, the indicator light corresponding
to the first option selected will flash and only the second option
will be activated; the indicator light corresponding to the button
will remain lit in a constant manner.
Steam Hygiene
This option enhances washing performance by generating
steam during the wash cycle that eliminates any bacteria
from fibres while treating them at the same time. Place the
laundry in the drum, choose a compatible programme and
select option “ “.
! The steam generated during washing machine operation
may cause the porthole door to become hazy.
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
Prewash
If this function is selected, the pre-wash cycle will run; this
is useful for removing stubborn stains.
N.B.: put the detergent in the relevant compartment.
Table of wash cycles
(**) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the
load inside it; this value will then be shown on the display.
2) At 60 °C the “Prewash” function cannot be selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation AS/NZS 2040.2: set wash Program Cotton Standard with a temperature of 40°C at
1600 rpm and using a load of 10 kg.
* If you select programme and exclude the spin cycle, the machine will pump out only.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary accor-
ding to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Icon
Description of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Detergent and
additives
Max. load (kg)
Cycle duration
Prewash
Wash
Fabric
softener
Synthetics Resistant 60° 800
5
Coloureds Intensive
40° 1600
9
Multi Colour
20° 1600 -
9
Darks
30° 800 -
6
Steam Refresh
- - - - - 2
Duvets: for down-stuffed garments. 30° 1200 -
3,5
Bed&Bath for bedlinen and towels. 60° 1600
10
Rinse
- 1600 - -
10
Spin and Pump out - 1600 - - - 10
Pump out only *
- OFF - - - 10
Anti Allergy Plus
60° 1600 -
6
Anti Allergy Delicate
40° 1600 -
6
Ultradelicates
30° 0 -
1
Wool: for wool, cashmere, etc. 40° 800 -
2,5
Mix 30': to refresh lightly soiled garments quickly (not suitable for wool, silk and clo-
thes which require washing by hand).
30° 800 -
4
Cotton Standard 60°C: heavily soiled whites and resistant colours.
60°
(Max. 90°)
1600
(3)
10
Cotton Standard 40°C (1): normally soiled loads at rated capacity. 40° 1600 -
10
(**) The duration of the wash cycles can be checked onthe display.
Loading ...
Loading ...
Loading ...