Loading ...
Loading ...
Loading ...
23
EN
Hub (underside)
Glass tray
Turntable ring assembly
Turntable shaft
INSTALLATION
• Select a level surface that leaves sufcient space for the air inlet and outlet.
• There must be 85 cm of space from the installation surface to the top.
• The unit must be placed with its back facing a wall. Leave a minimum clearance of
30 cm above the unit and 20 cm towards the sides.
• Do not remove the feet from the bottom of the unit.
• The unit will be damaged by blocking the air inlet and outlet.
• Place the microwave oven as far away as possible from radio and television sets.
Operation of the unit may cause interference with radio and television equipment.
• Plug the unit into a standard electrical outlet. Make sure that the voltage and
frequency match the specications on the rating plate.
• Caution: Do not place the unit above a cooker hood or other appliances that
generate heat. The device may otherwise be damaged.
Inserting the turntable
1. Never place the glass insert upside down in the microwave. The glass insert should
never be interfered with.
2. The glass insert and turntable must always be used while the microwave is in
operation.
3. All food and food containers must be placed on the glass insert for preparation.
4. If the glass insert or rotating ring is cracked or broken, contact customer service.
Loading ...
Loading ...
Loading ...