Loading ...
Loading ...
Loading ...
8
EN
• To cancel the starting procedure, press the on/off button (8)
before the timer runs out.
• To switch off the product, press the on/off button (8) again.
NOTICE
After switching off, the timer counts down 45 seconds
and the product blows cold air to cool down. Do not unplug the product
during that time. When the timer runs out, the product stops operating.
Heating modes and thermostat setting
• The current thermostat setting is shown on the display (12).
• Press the increase (9) or decrease (10) button to change the
thermostat setting.
• To display the current heating mode, press the heating mode
button (14) once. After approx. 3seconds the display (12) shows the
thermostat setting again.
• To change the current heating mode, press the heating mode
button (14) once while the current heating mode is being displayed.
Wait approx. 3seconds for the setting to be updated. The display
(12) shows the thermostat setting again.
• The following heating modes are available:
Display Power
On, when ambient
temperature is
Temperature
setting
H2
(High)
1500 W
≤ Set temperature
60 – 85°F
(15.6 – 29.4°C)
Always on ON
H1
(Low)
1000 W
≤ Set temperature
60 – 85°F
(15.6 – 29.4°C)
Always on ON
EC
(Eco)
1500 W ≤65°F (18.3°C)
72°F (22.2°C)
1000 W
65 – 72°F
(18.3 – 22.2°C)
In the EC (Eco) mode, the product cycles between the
low and high settings to reach optimum efficiency. In
this mode the Eco mode indicator (17) lights up.
OF
(off)
– Always on –
In this mode the heater is switched off. Only the fan is
working.
NOTICE
You can also press and hold the increase (9) or
decrease (10) button to quickly set the temperature.
Loading ...
Loading ...
Loading ...