Loading ...
Loading ...
Loading ...
16
Milano Use, Care, and Installation Guide
MILANO
WALL
CORE
Installation Instructions
Ductless Recirculation
Ductless recirculation is intended for applications where an exhaust duct work is not possible to be
installed. When converted, the hood functions as a recirculating hood rather than an exhaust hood.
Fumes and exhaust from cooking are drawn and filtered by a set of optional charcoal filters. The air is
then purified and re-circulated back within the home.
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new
duct work, if possible. The hood is most eective and ecient as an exhaust hood. Only when the
exhaust option is not possible should you recourse to converting the hood into a recirculating hood.
When converted to be a recirculating hood, a set of charcoal filters are required on top of its standard
Metal Filter set. Order according to its part number below. The standard mesh filters are intended to
capture residue from cooking, and the optional charcoal filters help to purify fumes exhausted from
cooking for recirculation.
Recirculating Kit Installation (required if no ducting is used)
Kit includes the charcoal filters, charcoal filter brackets and the air diverter plate.
Hood Model Part Number Filters in Package
ZOM-E30BS ZRC-01OM 2
ZOM-E30BBS ZRC-01OM 2
ZOM-E36BS ZRC-01OM 2
ZOM-E36BBS ZRC-01OM 2
1. Purchase recirculating kit per the part number above.
2. Secure air diverter plate to wall below duct cover bracket. (FIG. C). Remove aluminum mesh filter
from hood. Place charcoal filter over the back side of the aluminum mesh filter.
3. Secure charcoal filters to back side of filters by three brackets for each filter.
4. Reinstall aluminum mesh filters.
5. Enable recirculating mode (refer to page 19). The microprocessor in the controls will indicate the
need to change the charcoal filters after 120 hours of continuous use. Order replacement charcoal
filters per the list below.
Loading ...
Loading ...
Loading ...