Loading ...
Loading ...
Loading ...
9
4. Slide the trigger gun holder in position (Fig. 4).
5. To assemble the spray wand protector, rst snap the tab
into the slot located at the bottom left side of the unit, and
then secure it in place with one 4.8 x 16 screw (Fig. 5).
6. Fit the spray wand into the trigger gun and rotate it until
the two parts are completely locked (Fig. 6).
7. Connect the high-pressure hose to the trigger gun (Fig. 7).
8. Connect the other end of high-pressure hose to the water
outlet on the washer (Fig. 8).
Fig. 3
Nozzle
storage board
Fix with 4.8
x 16 screws
Fig. 4
Trigger gun holder
Fig. 5
Tab
Slot
4.8 x 16 screw
Fig. 6
Spray wand
Trigger gun
High-pressure hose
Trigger gun
Fig. 7
Loading ...
Loading ...
Loading ...