Loading ...
Loading ...
Loading ...
14
4. Install Sink
• Turn the sink upside down. Align the sink with the cutting line on the counter
• Using a pencil, mark 10 spots around the frame at a distance of about 1”
(25.4mm) from the edge of the sink
• For a solid installation, it is recommended that all 10 mounting clips are used
• Drill ¼” xation holes at a depth of 3/8” in the indicated location
• Insert the brass inserts by tapping them into the holes, split end rst
• Thoroughly clean the top portion of the sink edge. Clean underneath the
counter and around the cutting line using denatured alcohol
• Apply a small quantity of silicone-based sealant (not included) around the
cutting line, 1/8” away from the edge of the counter.
• Align the sink and x the mounting clips as shown. Firmly tighten the screw
into the brass insert
• Once the sink is correctly installed, tighten the wing nuts to x it into place
• Complete the installation of the counter
• Remove any excess sealant on the inside of the bowls
Underneath the counter
Loading ...
Loading ...
Loading ...