Loading ...
Loading ...
Loading ...
.28.
IMPORTANT: Check that the door opens and shuts correctly, without fouling,
after you have completed the door reversal process.
After the door has been reversed, you should check the door seal of the
Wine Coolers. The seal should not be creased or crushed; otherwise there
will be a gap between it and the inside of the door.
o The seal must adhere properly all the way around the door.
o If the seal is not adhering to the cabinet properly, then you should either:-
a) Use a warm damp cloth and manipulate the seal until it does adhere to
the cabinet properly, all the way around the door.
or
b) Use a hair dryer on its lowest heat setting and lightly heat the areas of
the door seal that are not adhering correctly. The heat will make the
seal more pliable and this will allow you to manipulate the seal into the
correct position.
IMPORTANT: DO NOT HEAT THE DOOR SEAL ON ANYTHING BUT THE LOWEST
HEAT SETTING, OR HEAT THE SEAL FOR A LONG PERIOD OF TIME. OTHERWISE
DAMAGE MAY BE CAUSED TO THE DOOR SEAL, WHICH WOULD NOT BE
RECTIFIED UNDER THE GUARANTEE FREE OF CHARGE.
IMPORTANT: WHEN YOU HAVE REVERSED THE DOOR OF THE APPLIANCE, IF
YOU HAVE PLACED THE APPLIANCE ON ITS BACK, YOU MUST WAIT FOR 8
HOURS BEFORE SWITCHING THE APPLIANCE BACK ON.
Loading ...
Loading ...
Loading ...