Loading ...
Loading ...
Loading ...
9 / 11 © 2018 Spectrum Brands, Inc.
Kevo Support: www.kwikset.com/kevo/support
USA: 1-800-327-5625
Australia free call 1800 623 118
New Zealand free call 0800 736 776
A B
Reference Guide
Kevo at a Glance
1. Touch Kevo anywhere on the
metallic surface below the light
string to lock and unlock.
2. Insert your SmartKey tool here
when rekeying your lock to
work with your existing key.
3. Changes color to
communicate with you.
4. Insert your standard key here.
5. Only use to reset Kevo
to delete all eKeys and
fobs. See “System Reset”
for more information.
6. Where all the programming
features are located.
7. Use to enroll phones and fobs.
8. Engages with turnpiece when
interior cover is installed.
When the cover is removed,
the turnpiece shaft can
be used to manually lock
and unlock the door.
9. Use to reset Kevo
activation range.
10. Use to enable and disable the
Status LED, Triple Touch Lock,
Audio, and Auto-Lock.
11. Communicates whether the
door is locked or unlocked
and lashes red for a low
battery alert. Can be turned
on and o by Switch #1.
Kevo-Compatible Devices
Smartphones and Smart Devices
A Kevo-compatible smartphone (or other
mobile internet-connected device or tablet)
must have Bluetooth Smart Ready/ Bluetooth
4.0 and an app speciic to the device must be
installed. Find out if your device is compatible
at www.kwikset.com/kevo/devices.
Kevo Fob
A Kevo Fob is a Bluetooth device that provides the
same touch-to-open convenience as a smartphone.
Up to eight fobs can be enrolled in a single Kevo lock. A
single fob can be enrolled in up to 25 dierent Kevo locks.
Note: You may choose to use only Kevo fobs, only
smartphones or a mix of both in your Kevo system.
Standard Key
Always make sure you have access to your standard key.
Switches
Triple Touch Lock and Auto-Lock
Switch 1
Status LED
Door lock status LED blinks every 6
seconds. ON position is factory default.
Switch 2
Triple Touch Lock
See “Triple Touch Lock.”
OFF position is factory default.
Switch 3
Audio
Beeping sound is heard during
programming and normal operation.
ON position is factory default.
Switch 4
Auto-Lock
Automatically re-locks door 30
seconds after unlocking. OFF position
is factory default.
Triple Touch Lock allows you to lock the door from the outside
without the use of a smartphone or fob. You might use Triple
Touch Lock if you are using only a standard key in your system
but wish to lock the door by touch, if your smartphone or fob is
disabled, or if you have a visitor in your home that will leave and
lock the door behind them.
To lock the door with this feature, tap the touch surface
three times, pausing briely between each touch. The
lock will perform the lock light sequence (page 7).
To enable Triple Touch Lock, set Switch #2 to the ON position.
Auto-Lock will automatically re-lock the door 30 seconds after
unlocking. To enable Auto-Lock, set Switch #4 to the ON position.
Both features are OFF by default.
CAUTION: With these feature enabled, it is possible to lock
yourself outside if you don’t have an enrolled smartphone,
Kevo fob or standard key with you.
1 2 3 4
ON OF
on o
1. Touch surface
3. Light string
2. SmartKey tool
access
5. Reset button
6. Back panel
7. Program button
8. Turnpiece shaft
4. Keyway
9. Positioning
Technology button
10. Switches
11. Status LED
System Reset
If you wish to perform a system reset, press and hold the Reset
button on the back panel for 10 seconds until the lock beeps and the
light ring lashes red.
WARNING: Resetting your Kevo system will restore your
lock to factory settings and delete all smartphones and fobs
from Kevo’s memory.
Phones: After a system reset, you will need to re-enroll your
Owner phone. You will still be able to send eKeys at no charge to
anyone who previously had an active eKey at the time of reset.
Fobs: After a system reset, all fobs will need to be re-enrolled.
See the online Troubleshooting guide for instructions.
A B
Loading ...
Loading ...