Loading ...
Loading ...
Loading ...
· 5 ·
Important Safeguards
IMPORTANT SAFEGUARDS: PLEASE READ AND
SAVE THIS INSTRUCTION AND CARE MANUAL.
which it was designed; namely, domestic use.
• The device must be placed on a at and
stable surface.
• This device requires the constant presence of an
adult user when in operation or hot, even
once unplugged.
• Do not pull on the cord to unplug the device. In
order to unplug the device, pull the plug from
the socket.
• Do not plug in or unplug the device with wet hands.
• This device is not designed to be activated by an
external timer or a remote control system.
• Ensure that your electrical installation is suitable for
the power of the Stand Mixer.
• Before use, check that the mains voltage
corresponds to that on the name plate of the device.
Should an extension cable prove necessary, use a
grounded cable and take every precaution to ensure
that nobody trips over it.
• The device is intended for use in domestic and
similar applications, such as farms, kitchen areas
reserved for the staff in shops, ofces and other
professional settings, by customers in hotels, motels
and other premises of a residential nature or in bed
and breakfast-type accommodation.
• In order to prevent the device from overheating, do
not place it in a corner, against a wall, or on a fragile
surface, such as a glass table, tablecloth, varnished
furniture or ‘Bulgomme’-style table protector.
• Ensure that every part of the device is cleaned
before use.
• Do not ll the bowl to more than 2/3 of its capacity.
• Switch off the appliance and disconnect from supply
before changing accessories or approaching parts
that move in use.
• Never mix hot liquids (milk-based beverages etcup).
Risk of burns! Allow hot liquids to cool before
mixing them.
• Before connecting, check that the voltage indicated
on the appliance (bottom of the appliance)
corresponds with the main voltage in your home.
• If this is not the case, consult your dealer and do
not use.
• This appliance may be tted with a non-rewireable
plug. If you need to change the fuse in a non-
rewireable plug, the fuse cover must be retted. If
the fuse cover is lost or damaged, the plug must not
be used until a replacement is obtained (available
from the appliance manufacturer).
• If the plug has to be changed because it is not
suitable for your socket, or becomes damaged,
it should be cut off and appropriate plug tted
following the wiring instructions. The plug removed
must be disposed of safely as insertion into a mains
socket is likely to cause an electrical hazard.
• This equipment must be disconnected from the
outlet when not in use.
• Do not allow this unit to be exposed to water.
Loading ...
Loading ...
Loading ...