Ecosmart ECO 27 Electric Tankless Water Heater

User Manual

For ECO 27. Also, The document are for others Ecosmart models: ECO 8, ECO 11, ECO 18, ECO 24, ECO 36

PDF File Manual, 41 pages, Read Online | Download pdf file

ECO 27 photo
INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL
ECO 8 | ECO 11 | ECO 18 | ECO 24 | ECO 27 | ECO 36
IMPORTANT SAFETY INFORMATION
When installing or using any high voltage electrical appliance, basic safety precautions should always be
followed. Under no circumstance should you attempt to clean, install, inspect, repair, disassemble or
otherwise service this water heater, without first shutting off all power to the unit directly at the circuit
breaker box. SERIOUS BODILY INJURY OR DEATH COULD OCCUR IF YOU IGNORE THIS WARNING.
THIS PRODUCT SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN AND A QUALIFIED PLUMBER IN
ACCORDANCE WITH ALL NATIONAL, STATE, PROVINCIAL AND LOCAL ELECTRICAL & PLUMBING CODES.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY AND COMPLETELY PRIOR TO INSTALLATION & USE.
FAILURE TO DO SO COULD CAUSE PROPERTY DAMAGE, SERIOUS INJURY, OR DEATH.
This manual should be given to the homeowner after installation and should be retained for future reference.
Tested and certified by the Water Quality Association against NSF/ANSI 372 for lead free
compliance.
Loading ...
Loading ...
Loading ...

Other documents for Ecosmart ECO 27

The following documents are available:
User Manual Specification Photos

Specifications

Ecosmart ECO 27 Questions and Answers


#1 How do you determine which size/fittings to buy?

It comes with 3/4 brazed male connections. I used braded hose connections (found at Lowe’s/HD). Recommend grabbing a shut off valve for the supply side. This helps with maintenance later.

#2 Does this product come with pressure release valve?

No. We had to have our plumber add a pressure release valve to the hot water line coming out.

#3 Can it be installed in a manufactured home?

Yes, as long as the electrical requirements for installation are met. The type of home does not matter.

#4 Can I run a 1/2 inch cold feed pipe to the 3/4 inch NPT input (with adapter) with out any problems? Worried about air or pressure loss.

You can without any loss of pressure. If you have 1/2 coming in, you likely have 1/2 coming out.

#5 Can a plumber install this to qualify for the warranty or do I need a plumber and an electrician both ?

On the week of 6-25-18 and spoke to a technician before purchasing unit, this is one of the questions I asked him. He said they used to require both licensed electrician & plumber, but now they just require one of the two for the warranty to be valid.

#6 Is this unit rated for use to supplement a solar water heated system?

You need a method to make sure your input temp is not more than your set point output temp. There have been people severely burned from solar water heaters without some kind of limiting system to make sure you do not step into a shower, turn the water on, wait for it to warm up, and find the temp increase does not stop at conformable and reaches scalding before they can get out. That said, this is a great unit to boost a solar system to the usable temperature range.