Loading ...
Loading ...
Loading ...
21
EN
Cleaning the cyclone cone system
1. Hold the lter unit rmly and turn it anti-clockwise. After turning, pull the
lter unit out to separate it from the cyclone cone.
2. Remove the individual components of the lter unit. Carefully tap the lter
wadding, the lter unit and the cyclone cone over the bin to remove any
accumulated dust. If necessary, the lter system can be cleaned with water.
Please note that the lter system must be completely dry before being used
again.
3. Reinsert the lter unit and turn it clockwise to secure it in place.
4. After the lter unit has been reinserted into the dust collector, you can
reconnect it to the device housing as described in the section “Attaching /
removing the dust collector”.
5. Remove the sponge insert in the motor and carefully tap it over the bin to
remove any build-up of dust. If necessary, the sponge insert can be rinsed o
with clean water. Please note that this must be completely dry before being
used again.
Cleaning the oor brush
1. To remove the oor brush, press the release button on the oor brush.
Remove the roller brush by simultaneously pressing the oor brush down
towards the roller brush and clean it.
2. Place the roller brush back into the device after cleaning.
Loading ...
Loading ...
Loading ...