Subwoofer
Operating Instructions
SA-SW5
5-027-345-12(1)
©2021 Sony Corporation Printed in Malaysia
Owner’s Record
The model and serial numbers are located on the
rear of the subwoofer.
Record the serial numbers in the space provided
below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. SA-SW5
Serial No.
About compatible
models for the
subwoofer
The SA-SW5 subwoofer works only with the specified
model. For information about compatible models,
visit Sony's website.
In these Operating Instructions, the operations are
described for the subwoofer used with the
compatible model HT-A7000 or HT-A9.
Parts and Controls
Front
Power indicator
– Flashes slowly (green): The subwoofer is
attempting to automatically connect to a
compatible model.
– Lights up (green): The subwoofer is connected to
a compatible model.
– Flashes twice repeatedly (green): The subwoofer
is attempting to manually connect to a
compatible model.
– Flashes/lights up (amber): The software is
updating.
– Lights up (red): The subwoofer is in standby
mode.
– Turns off: The subwoofer is turned off.
Slit
Note
The brightness of the power indicator syncs with the
DIMMER settings of a compatible model.
Rear
(power) button
LINK button
AC inlet
Installation
The following illustration is the installation example
to use the subwoofer with the compatible model
HT-A7000 and optional rear speakers.
SA-SW5
1 Install the subwoofer in the place that you
want.
You can install the subwoofer in the place that
you want because the output sound from it has
no directivity.
The above illustration is the example for
installation of the subwoofer.
Note
Install the subwoofer with the slit on the bottom, as
shown in the “Parts and Controls” illustration. The
subwoofer is not designed to be installed in a
different orientation.
Connection
Tip
You can connect the optional rear speaker with a
compatible model in the following way when
installing it too.
1 Turn on a compatible model.
2 Connect the AC power cord (mains lead)
(supplied) to the subwoofer, and then connect
the cord to the AC outlets (mains).
3 Make sure that the power indicator on the
subwoofer lights in green.
When the power indicator lights in green, the
connection between the subwoofer and a
compatible model is established.
For the cases below, follow the steps under
“Performing a Manual Connection” to connect the
subwoofer to a compatible model.
– When you use multiple compatible models and
want to specify the model to which you wish to
connect the subwoofer.
– If you have previously connected other
subwoofers to the compatible model.
– If you cannot connect the subwoofer to a
compatible model automatically for any other
reason.
Performing a Manual Connection
The following operation is described for the
subwoofer used with the compatible model
HT-A7000 or HT-A9. Use the remote control supplied
with the compatible model HT-A7000 or HT-A9 when
performing this operation.
If you use other compatible models, refer to the
Operating Instructions supplied with them.
1 Press HOME.
The home menu appears on the TV screen.
2 Select [Setup] - [Advanced Settings] on the
home menu.
3 Select [Speaker Settings] - [Wireless Speaker
Settings] - [Start manual linking].
The [Start manual linking] screen appears on the
TV screen.
4 Press LINK on the subwoofer.
The power indicator of the subwoofer that had
LINK pressed flashes twice repeatedly in green.
5 Select [Start].
The manual connection starts.
The connecting process appears on the TV screen.
To cancel the manual connection, select [Cancel].
6 When [Subwoofer] display [Connected], select
[Finish].
7 Press
(enter)
.
The manual connection is established and the
power indicator of the subwoofer lights in green.
Note
• If you perform [Start manual linking], [Link mode]
of [Wireless Speaker Settings] is set to [Manual]
automatically.
• Only the speakers for which [Connected] has been
displayed in Step 6 connect to a compatible model.
If the subwoofer is not properly connected,
perform the operation again from Step 1.
If Wireless Transmission is Unstable
If you use multiple wireless systems, such as a
wireless LAN, the wireless signals may become
unstable. In this case, the transmission may be
improved by changing the following setting.
The following operation is described for the
subwoofer used with the compatible model
HT-A7000 or HT-A9. Use the remote control supplied
with the compatible model HT-A7000 or HT-A9 when
performing this operation.
If you use other compatible models, refer to the
Operating Instructions supplied with them.
1 Press HOME.
The home menu appears on the TV screen.
2 Select [Setup] - [Advanced Settings] on the
home menu.
3 Select [Speaker Settings] - [Wireless
Speaker Settings] - [RF Channel].
4 Select the setting you want.
• [On] (default setting): Normally select this. The
system automatically selects the better channel
for transmission. Stronger mode for wireless
interference.
• [Off]: The system selects a channel from the
limited frequency band to prevent external
wireless interference. If sound dropping occurs
while [On] is selected, it may be improved by
selecting [Off].
Note
• If you change the [RF Channel] setting from [Off] to
[On], it may take 1 minute to reconnect.
• A compatible model may not meet this setting
depending on countries/regions where you
purchase it.
Troubleshooting
If you experience any of the following difficulties
while using the subwoofer, use this troubleshooting
guide to help remedy the problem before requesting
repairs. Should any problem persist, consult your
nearest Sony dealer.
Be sure to bring all of your subwoofer, a compatible
model and optional rear speakers (not supplied)
even if it seems as though only one has a problem,
when you request to repair.
The following solutions are described for the
subwoofer used with the compatible model
HT-A7000 or HT-A9.
If you use other compatible models, refer to the
Operating Instructions supplied with them.
No sound or only a very low-level sound is heard
from the subwoofer.
q Press SW (volume) + or BASS + on the remote
control of a compatible model to increase the
subwoofer volume.
q Make sure that the power indicator on the
subwoofer is lit in green.
q If the power indicator on the subwoofer does not
light, try the following.
– Make sure the AC power cord (mains lead) of the
subwoofer is connected properly.
– Press (power) of the subwoofer to turn on the
power.
q If the power indicator on the subwoofer flashes
slowly in green or lights in red, try the following.
– Move the subwoofer to a location near a
compatible model so that the power indicator on
the subwoofer lights in green.
– Follow the steps in “Performing a Manual
Connection.”
– Check the wireless connection status. For details,
refer to the Operating Instructions supplied with
a compatible model.
q If the power indicator on the subwoofer flashes in
red, press (power) of the subwoofer to turn off
the power and check whether the ventilation holes
of the subwoofer is blocked or not.
q If the input sources contain very little bass sound
components (i.e., a TV broadcast), the sound from
the subwoofer may be difficult to hear. You can
check the subwoofer sound by emitting the test
tone.
q Set the night mode to off. For details, refer to the
Operating Instructions supplied with a compatible
model.
q If you change the [RF Channel] setting from [Off]
to [On], it may take 1 minute for the sound to be
output.
Sound skips or has noise.
q If there is a device nearby that generates
electromagnetic waves, such as a wireless LAN or
a microwave oven in use, locate the subwoofer
and a compatible model apart from it.
q If there is an obstacle between the subwoofer and
a compatible model, move or remove it.
q Locate the subwoofer and a compatible model as
close as possible.
q Change the [RF Channel] setting to [Off], and then
change to [On] again.
q Switch the network connection of the TV or Blu-ray
Disc player from wireless to wired.
q Change the [Wireless Playback Quality] setting to
[Connection].
Specifications
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(FTC)
With 2 ohms loads, from 28 - 200 Hz; rated 130 W,
minimum RMS power, with no more than 1% total
harmonic distortion from 250 mW to rated output.
POWER OUTPUT (reference)
300 W (at 2 ohms, 100 Hz)
Canadian models:
POWER OUTPUT (reference)
300 W (at 2 ohms, 100 Hz)
Speaker system
Subwoofer speaker system, Passive radiator type
Speaker
180 mm (7 1/8 in.) cone type
200 mm (7 7/8 in.) × 300 mm (11 7/8 in.) cone type,
Passive radiator
Power requirements
120 V AC, 60 Hz
Power consumption
On: 43 W
Standby mode: 1 W or less
Turned off: 0.5 W or less
Dimensions (approx.) (w/h/d)
277 mm × 409 mm × 422 mm (11 in × 16 1/8 in × 16 5/8 in)
(not including projection portion)
Mass (approx.)
13.0 kg (28 lb 11 oz)
Wireless transmitter/receiver section
Communication system
Wireless Sound Specification Version 4.0
Frequency band
5 GHz
Modulation method
OFDM
Included items
• Subwoofer (1)
• AC power cord (mains lead) (1)
• Operating Instructions (1)
Important information
on software
This product contains software that is subject to the
GNU General Public License (“GPL”) or GNU Lesser
General Public License (“LGPL”). These establish that
customers have the right to acquire, modify, and
redistribute the source code of said software in
accordance with the terms of the GPL or the LGPL.
For the method to confirm the GPL, LGPL and other
software licenses contained in the subwoofer, please
refer to the Operating Instructions of a compatible
model.
When you use the compatible model HT-A7000 or
HT-A9, please refer to [Software License Information]
under
[Setup] - [Advanced Settings] - [System
Settings] on the home menu.
You may find a copy of the relevant source code as
required under the GPLv2 (and other licenses) at
https://oss.sony.net/Products/Linux
You may obtain the source code as required by the
GPLv2 on a physical medium from us for a period of
three years after our last shipment of this product by
applying through the form at
https://oss.sony.net/Products/Linux
This offer is valid to anyone in receipt of this
information.
Please note that Sony cannot answer or respond to
any inquiries regarding the content of this source
code.
All other trademarks are trademarks of their
respective owners.
WARNING
To reduce the risk of fire or electric shock, do not
expose this subwoofer to rain or moisture.
The subwoofer is not disconnected from the mains
as long as it is connected to the AC outlet, even if the
subwoofer itself has been turned off.
To reduce the risk of fire, do not cover the ventilation
opening of the subwoofer with newspapers,
tablecloths, curtains, etc.
Do not expose the subwoofer to naked flame sources
(for example, lighted candles).
To reduce the risk of fire or electric shock, do not
expose this subwoofer to dripping or splashing, and
do not place objects filled with liquids, such as vases,
on the subwoofer.
As the mains plug is used to disconnect the
subwoofer from the mains, connect the subwoofer to
an easily accessible AC outlet. Should you notice an
abnormality in the subwoofer, disconnect the mains
plug from the AC outlet immediately.
Do not install the subwoofer in a confined space,
such as a bookcase or built-in cabinet.
Do not place this product close to medical
devices.
This product (including accessories) has magnet(s)
which may interfere with pacemakers, programmable
shunt valves for hydrocephalus treatment, or other
medical devices. Do not place this product close to
persons who use such medical devices. Consult your
doctor before using this product if you use any such
medical device.
Indoor use only.
For the customers in the U.S.A.
NOTE:
This subwoofer has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
subwoofer generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this subwoofer
does cause harmful interference to radio or television
reception, which can be determined by turning the
subwoofer off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the subwoofer
and receiver.
– Connect the subwoofer into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
If you have any questions about this subwoofer:
Visit: www.sony.com/electronics/support
Contact: Sony Customer Information Service Center
at 1-800-222-Sony(7669)
Write: Sony Customer Information Service Center
12451 Gateway Blvd., Fort Myers, FL 33913
Supplier's Declaration of Conformity
Trade Name: SONY
Model: SA-SW5
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127
U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this subwoofer.
This subwoofer must not be co-located or operated
in conjunction with any other antenna or transmitter.
This subwoofer complies with FCC radiation exposure
limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure
Guidelines. This subwoofer should be installed and
operated keeping the radiator at least 20cm or more
away from person’s body.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software,
which is the passed down through the MAC, through
the digital and analog baseband, and finally to the
RF chip. Several special packets are initiated by the
MAC. These are the only ways the digital baseband
portion will turn on the RF transmitter, which it then
turns off at the end of the packet. Therefore, the
transmitter will be on only while one of the
aforementioned packets is being transmitted. In
other words, this device automatically discontinue
transmission in case of either absence of information
to transmit or operational failure.
Frequency Tolerance: ±20 ppm or less
For the customers in Canada
This subwoofer contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development
Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This subwoofer may not cause interference; and
(2) This subwoofer must accept any interference,
including interference that may cause undesired
operation of the subwoofer.
This subwoofer complies with ISED radiation
exposure limits set forth for an uncontrolled
environment and meets RSS-102 of the ISED radio
frequency (RF) Exposure rules. This subwoofer should
be installed and operated keeping the radiator at
least 20cm or more away from person’s body.
5.15 - 5.35 GHz band is restricted to indoor operations
only.
Data transmission is always initiated by software,
which is the passed down through the MAC, through
the digital and analog baseband, and finally to the
RF chip. Several special packets are initiated by the
MAC. These are the only ways the digital baseband
portion will turn on the RF transmitter, which it then
turns off at the end of the packet. Therefore, the
transmitter will be on only while one of the
aforementioned packets is being transmitted. In
other words, this device automatically discontinue
transmission in case of either absence of information
to transmit or operational failure.
Precautions
On safety
• Should any solid object or liquid fall into the subwoofer,
unplug the system and have it checked by qualified
personnel before operating it any further.
• Do not climb on the subwoofer, as you may fall down and
injure yourself, or the subwoofer damage may result.
On power sources
• Before operating the subwoofer, check that the operating
voltage is identical to your local power supply. The
operating voltage is indicated on the nameplate at the rear
of the subwoofer.
• If you are not going to use the subwoofer for a long time,
be sure to disconnect the subwoofer from the wall outlet
(mains). To disconnect the AC power cord (mains lead),
grasp the plug itself; never pull the cord.
• One blade of the plug is wider than the other for the
purpose of safety and will fit into the wall outlet (mains)
only one way. If you are unable to insert the plug fully into
the outlet, contact your dealer.
• AC power cord (mains lead) must be changed only at a
qualified service shop.
On heat buildup
• Although the subwoofer heats up during operation, this is
not a malfunction. If you continuously use this subwoofer
at high volume, the subwoofer temperature at the rear and
bottom rises considerably. To avoid burning yourself, do
not touch the subwoofer.
On placement
• Do not place the subwoofer near heat sources or in a place
subject to direct sunlight, excessive dust, or mechanical
shock.
• Do not place metal objects other than a TV around the
subwoofer. Wireless functions may be unstable.
• If the subwoofer is being used in combination with a TV,
VCR, or tape deck, noise may result and picture quality may
suffer. In such a case, place the subwoofer away from the
TV, VCR, or tape deck.
• Use caution when placing the subwoofer on a surface that
has been specially treated (with wax, oil, polish, etc.), as
staining or discoloration of the surface may result.
• The speakers of this subwoofer are not of magnetically
shielded type. Do not place magnetic cards on the
subwoofer or near it.
If you encounter color irregularity on a
nearby TV screen
Color irregularities may be observed on certain types of TV
sets.
On cleaning
Clean the subwoofer with a soft, dry cloth. Do not use any
type of abrasive pad, scouring powder, or solvent such as
alcohol or benzine.
If you have any question or problem concerning your system,
please consult your nearest Sony dealer.
