Loading ...
Loading ...
Loading ...
4
Getting to Know Your Bella Immersion Blender
Product may vary slightly from illustration
Before using the Bella Immersion Blender for the rst time
1. Remove all packaging materials before using.
2. Wash the blending shaft and the whisk attachment in soapy water. Rinse and dry thoroughly.
CAUTION: Do not touch blades. The blending shaft attachment is very sharp.
Use extreme care when handling. Failure to do so can result in personal injury.
3. The housing may be wiped with a damp cloth.
CAUTION: Do not immerse motor housing in water or other liquids.
Operating Instructions
IMPORTANT: Blades are very sharp, handle with care. Ensure the immersion blender is unplugged
fromthepower outlet before assembling or removing attachments.
1. To assemble the detachable blending shaft to the motor housing, turn the shaft on a
counter-clockwise direction until tightened.
2. Plug the immersion blender to the power outlet.
3. Lower the immersion blender into food and press the desired speed at the top of the motor
housing.
NOTE: Maximum duration at high speed cannot exceed 1 minute.
Let the unit rest for 1 minute between two consecutive blending cycles.
NOTE: Do not run the immersion blender without any load for more than 15s.
4. When nished processing, stop the immersion blender by releasing the speed control button at the
top ofthemotor housing.
5. To disassemble, just turn in the blending shaft on a clockwise direction
CAUTION: Make sure the level of liquid or food in the container is below the joint of the blender,
as this could cause an electric shock.
Stainless steel
whisk attachment
With Stainless steel
blending blade
Detachable
Blending Shaft
2 Speed Control Buttons
(High and Low)
Motor
Housing
17193-17194_BELLA_Hand Blender with Whisk IM.indd 417193-17194_BELLA_Hand Blender with Whisk IM.indd 4 2020-07-13 4:50 PM2020-07-13 4:50 PM
Loading ...
Loading ...
Loading ...