Loading ...
Loading ...
Loading ...
CLEANING
Hand-Washing
Wash containers, lids and blade assembly
in warm, soapy water. Use a dishwashing
utensil with handle to avoid direct contact
with the blades. Exercise care when handling
the blade assembly as the blades are sharp.
Thoroughly rinse and air-dry all parts.
STUCK-ON INGREDIENTS IN THE
POWER NUTRI™ BOWL
For stuck-on ingredients, such as nut
butter, rinse the bowl and blade assembly
under warm water.
Next, fill the bowl with warm water up to
the top of the Power Paddle and add 1–2
small drops of washing-up liquid.
Screw on the blade assembly and press
MIX. Twist the Power Paddle anti-clockwise
continuously while cleaning.
Then, empty contents and rinse under
warm water and wipe with a dishwashing
utensil, if needed.
Dishwasher
Containers, lids and blade assembly are
ONLY dishwasher safe on the top rack.
Ensure the blade assembly and lid are
removed from the container before placing
in the dishwasher.
Motor Base
Unplug the unit before cleaning. Wipe
motor base with a clean, damp cloth.
12 13ninjakitchen.co.ukninjakitchen.co.uk
CARE & MAINTENANCE
STORAGE
For cord storage, wrap cord with hook-
and-loop fastener near the back of the
motor base. DO NOT wrap the cord around
the bottom of the base for storage.
DO NOT store blended or unblended
ingredients in the cup or bowl with the blade
assembly attached. Use only the spout
lid or storage lid when storing blended or
unblended ingredients in the containers.
DO NOT stack items on top of the containers.
Store any remaining attachments alongside
the unit or in a cabinet where they will not be
damaged or create a hazard.
RESETTING THE
MOTOR THERMOSTAT
This unit features a unique safety system
that prevents damage to the motor and
drive system should you inadvertently
overload it. If the unit is overloaded, the
motor will be temporarily disabled. Should
this occur, follow the reset procedure below.
1 Unplug the unit from the
electrical socket.
2 Allow the unit to cool for approximately
15 minutes.
3 Remove the blade assembly from the
container. Empty the container and
ensure no ingredients are jamming the
blade assembly.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, call Customer
Service on 0800 862 0453. So we may
better assist you, please register your
product online at ninjakitchen.co.uk/
registerguarantee and have the product
on hand when you call.
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation, unplug unit
before troubleshooting.
Control panel does not illuminate.
• Make sure unit is plugged in. If the unit is powered on and no container is installed, the
unit will display ‘- -’. The available programs will illuminate after placing a container on
base and rotating it clockwise until it clicks into place.
Control panel doesn’t turn o.
• Remove container from base by rotating it anti-clockwise and lifting it up. The display
with flash ‘- -’. Unplug the power cord from the socket. If the unit remains plugged in,
the display will time out after 3 minutes of inactivity. Press any button to wake the unit.
Doesn’t mix well; ingredients get stuck.
• Using the Auto-iQ® programs is the easiest way to achieve great results. The pulses
and pauses allow the ingredients to settle toward the blade assembly. If ingredients
are routinely getting stuck, adding some liquid will usually help.
• When filling the cup, start with fresh fruit or vegetables, then leafy greens or herbs.
Next add liquids or yogurt, then seeds, powders or nut butters. Finally, add ice or
frozen ingredients.
• If using the Power Nutri™ Bowl, during the blending process twist the Power Paddle
anti-clockwise continuously to circulate ingredients.
Unit moves on counter while blending.
• Make sure the counter and feet of the unit are clean and dry.
Lid or Hybrid Edge™ Blades Assembly is hard to install on the container.
• Set the container on a level surface. Carefully place the lid or blade assembly on the
top of the container and align the threads so the lid/blade assembly sits flat. Twist
clockwise until you have a tight seal.
Can’t remove the Power Paddle from the Power Nutri™ Bowl.
• The Power Paddle in the Power Nutri™ Bowl is not removable. For cleaning
instructions, refer to the Care & Maintenance section.
1-2 SMALL DROPS OF WASHING-UP LIQUID
FILL WATER TO TOP OF
POWER PADDLE
NOTE: The Power Paddle in the Power
Nutri™ Bowl is not removable.
Loading ...
Loading ...
Loading ...