Loading ...
Loading ...
Loading ...
START/PAUSE BUTTON
This button allows you to start or
pause the dryer to check the contents
or perhaps add more clothes.
NOTE: The dryer will not start
unless the door is closed.
(If door is not closed you
will hear 9 Beeps and "E40"
on display.)
8
www.electrolux.com
ANTI CREASE CYCLE
IN PROGRESS
END OF PROGRAM and
CLEAN FILTER REMINDER
When the drying program is completed,
the display will show text “End”
The Clean Filter LED turns on
and blinks at the end of each dry
cycle to serve as a reminder to
user to clean lint filter at the end
of each load.
3
Touch this touch pad to select the
drying mode. Corresponding light for
each mode is shown on display.
Drying mode can only be selected
during initial set up.
• Low
For small load
• Mid
For drying most fabrics.
• High
For drying delicates and synthetics at
lower heat for maximum care of
the fabrics. The Low Heat setting will
cause the heater to cycle on for shorter
time than the normal setting.
• Airing :
This setting does not heat.
ONLY circulate the air in the dryer to
shake out dust and refresh clothes
This mode gives you the option of
selecting different drying levels.
Drying mode
SETTING DRYING MODE
NOTE:
Anti crease can be stopped at any time by
opening the door and removing the clothes.
The anti crease cycle is designed to help
prevent creases forming in the clothes
after normal drying cycle has ended.
The anti crease progress indicator will start
blinking with clean filter during the time
anti crease phase is running. The drum will
rotate for 5 seconds every minute and will go
for 1 hour Anti crease phase cannot be disabled.
HighLowAiring
Dry
Temp
Aring Low Mid High
Off
30 mins
O O O
60 mins
O O O
90 mins
O O O
O
O
O
Delicates
O O
Synthetics
O
O
O O
Refresh
Bedding
O O
Energy Saver
Mixed Dry - Iron
O O
Mixed Dry - Cupboard
O O
Mixed Dry - Extra
O O
Cottons Dry - Iron
O O
Cottons Dry - Cupboard
O O
Cottons Dry - Extra
O O
O
O
O
O
O
O
O
Temp
Program
O
O
Loading ...
Loading ...
Loading ...