Loading ...
Loading ...
Loading ...
MAINTENANCE:
Periodic inspection and removal of dirt and contaminants will ensure that the heater can be
operated safely. Always perform maintenance and cleaning before operating the heater if it has
not been used in a long period of time.
1. Check the Reflector and IR-Filament at least once a month for dirt and dust. If cleaning is
necessary, follow the cleaning and maintenance instructions.
2. Inspect more frequently if the environment is prone to unusual amounts of dirt or dust.
3. Visually inspect the heater, power cord and plug for any damage or wear at least once per
month. If damaged or worn, consult with a technical service.
Note: Proper and regular maintenance is easy and important for the long and efficient operation
of your heater.
CLEANING:
Regular and careful cleaning helps your infrared heater operate efficiently for many trouble-free
years. To clean your heater, follow the steps below:
1. Unplug the power cord for your safety before cleaning your appliance.
2. Make sure the heater is cool before continuing.
3. Clean the outer shell with a soft, damp cloth. You may use a mild detergent if necessary.
After cleaning, dry the unit with a soft cloth.
CAUTION: DO NOT let liquids enter the heater.
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean
the heater. This may cause damage or deterioration to the surface of the heater.
5. Use an air blower to remove any loose dust, dirt or debris from the unit.
6. DO NOT immerse the heater in water
7. Wait until the heater is completely dry before use.
Storage: Store the heater in a cool, dry location when not in use to prevent dust and dirt build up.
Use the original carton or other clean container to store.
CAUTION:
1. Always disconnect the heater from the electrical supply and allow it to cool before attempting
to work on it.
2. If the heater has collected dust or dirt inside the unit or around the heating element, have the
unit cleaned by a qualified service agent. Do not operate the heater in this condition.
3. The only maintenance required is cleaning of the external surfaces of the heater.
4. Do not touch the heating element with bare fingers, as residue from your hand could affect
the life of the lamp. If it is accidentally touched, remove the finger marks with a soft cloth
moistened with mentholated spirit or alcohol.
5. The heater contains no user-serviceable parts. If the product is damaged or otherwise
malfunctioning, it must be returned to the manufacturer or its service agent or it must be
properly disposed of. Do not attempt to repair or adjust any electrical or mechanical
functions on this heater.
6. Damaged supply cords must be replaced by a service agent or similarly qualified person in
order to avoid hazard.
RECYCLING:
At the end of the electrical products useful life it should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice
in your area.