Loading ...
Loading ...
Loading ...
➔ Turn the rotary control to “MILK QUANTITY” and press it.
➔ Turn the rotary control to select the quantity of your choice and press it.
Note: Make sure that your cups or glasses t.
Select froth quantity (all drinks with milk)
➔ Turn the rotary control to “FROTH QUANTITY” and press it.
➔ Turn the rotary control to select the quantity of your choice and press it.
Note: Make sure that your cups or glasses t.
Select temperature
(if “TEMPERATURE”, see 3.3. “INDIVIDUAL” is set in the menu “SETTINGS”)
➔ Turn the rotary control to “TEMPERATURE” and press it.
➔ Turn the rotary control the temperature of your choice (STANDARD, HIGH, MAXIMUM) and press
the rotary control to conrm the setting.
➔ To exit a menu level turn the rotary control to “EXIT” in each level. Then press the rotary control.
Or press the exit button.
➔ Repeat until you are back in the main menu.
Note: If no changes are made to the settings for some time, the appliance switches back to the main
menu automatically.
4.4. Adjusting standard settings for hot water (e.g. tea)
Ex-factory the standard setting for hot water is 150ml.
The display shows: “150ml”
➔ Place a cup under the spout (g. 5).
➔ Turn the rotary control to “HOT WATER” and press it.
The cup light switches on. The appliance prepares hot water in the standard setting.
The standard setting can be altered in two different ways:
4.4.1. Live programming
You can change and save the standard setting during the brewing process as follows.
➔ Turn the rotary control to “SETTINGS” and press it.
➔ Turn the rotary control to “DRINK RECIPES” and press it.
➔ Turn the rotary control to “HOT Water” and press it.
➔ Turn the rotary control to “LIVE PROGRAMMING”.
➔ To change the standard setting now press the rotary control.
The display shows “PLEASE WAIT”. The appliance heats up and will start the preparation.
The display shows “STOP HOT WATER?”
➔ Press the rotary control when the required quantity of hot water is reached.
The standard setting has now been altered and saved. The display shows “RECIPE SAVED” for a short
time and will then switch back to the main menu with the new standard settings.
4.4.2. Manual programming
You can also change and save the standard settings manually.
➔ Turn the rotary control to “SETTINGS” and press it.
➔ Turn the rotary control to “DRINK RECIPES” and press it..
➔ Turn the rotary control to “HOT WATER” and press it.
Select water quantity
➔ Turn the rotary control to “WATER QUANTITY” and press it.
80
4. Preparing coffee varieties
04_Niv_859_BDA_sw_GB_03.indd 80 13.04.17 15:42
Loading ...
Loading ...
Loading ...