Loading ...
Loading ...
Loading ...
Instructions for Converting Rangetop to Operate on Liquefied Petroleum Gas
1. Convert the Pressure Regulator
To access the gas regulator, pull
the rangetop away from the
cabinet wall. The gas regulator is
located at the bottom right corner
of the rangetop.
a. Electrical shock hazard can occur
and result in injury or death.
Disconnect electrical power to the
rangetop before servicing. Do not
remove regulator or allow it to
turn during servicing.
b. Unscrew the cap from the
regulator. Do not remove the
spring from the regulator.
c. Unscrew the insert from the cap
and turn it over so the longer stem
is facing the cap. Replace insert on
the cap. Replace the cap on the
regulator.
2. Convert Top Burner for LP/ Propane Gas
Save the natural gas orifices
removed from the appliance for possible future
conversions to natural gas. You should use the
following process to c
onvert to Natural gas.
Take extra care when handling steel parts.
a. Remove cooking grates, burner caps
and inner burner rings.
b. Lift off outer burner heads and burner
bases.
c. Remove the factory installed natural gas
orifices from the center of the orifice
holders using a 7mm nut driver.
Remember to keep the original natural
gas orifices for future conversions back
to natural gas. Replace the LP orifice in
each ori
fice holder. Tighten each orifice
until snug. Use caution not to over
tighten.
Care should be taken when removing and replacing gas components. Use proper
support to prevent damage to components.
20
Loading ...
Loading ...
Loading ...