Loading ...
Loading ...
Loading ...
20
EN
3. Re-install the components as below steps: Firstly, Put the cyclone cover into dust
cup, then, re-stall the lters (centrum lter, combed contton) into cyclone cover
as below picture. Secondly, Install the dust container following up the opposite
procedures as detaching the dust container.
Cleaning the roller brush
• If the roller brush becomes blocked or jammed for any reason, the vacuum pressure
will be lower down. The roller brush may then need to be cleaned.
• First turn off the appliance, then, disconnect the brush from whole unit. You can see
bottom of brush as below, take one small tool like a pair of scissors or a sharp knife
to remove any items such as threads that may have become entangled.
• If the roller brush needs to be taken out for cleaning, push slip button on the bottom
of brush by nger or a coin, remove slip button as below picture, take out the roller
brush for cleaning, afterwards, Put the slip button on roller brush and lock it by
nger.
Note: Keep the range button within your eye sight and keep it out of reach of
Children.
Loading ...
Loading ...
Loading ...