Loading ...
Loading ...
Loading ...
Frequently Asked Questions
With the help of the following guide minor faults in the performance of the
machine, some of which may result from incorrect operation, can be remedied
without contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
Indicator lights or information on the time display
Problem Possible cause and solution
The indicator light
comes on at the end of
the program.
The tumble dryer is not working correctly or
economically. Possible causes could be clogging
caused by lint or detergent residue.
Please see “Cleaning and care” for notes on
cleaning.
Clean the lint filters.
Also check the plinth filter and clean it if
necessary.
To turn the indicator light off: open and close
the door (while the dryer is switched on).
You can influence when the indicator lights up.
To do this, follow the instructions in
“Programmable functions – Airways indicator”.
and light up after
a program has been
canceled, a signal
sounds.
The system has been clogged by lint or detergent
residue.
Turn off : turn the tumble dryer off and then
on again.
Clean the lint filters and the plinth filter.
Please see “Cleaning and care” for notes on
cleaning.
Check that the lint filters and the plinth filter are
not damaged or worn.
If all lint filters are damaged, deformed, or cannot be
cleaned anymore, they must be replaced. For
information on when to replace a plinth filter that is
not functioning properly, refer to “Frequently Asked
Questions – Replacing the plinth filter”.
50
Loading ...
Loading ...
Loading ...