Loading ...
Loading ...
Loading ...
7
All cold air is coming from freezer compartment, there is an air flow adjustment
knob on the back panel.
With same Temperature adjustment setting,
1. Adjust freezer air flow knob to left hand side position that will allow more cold air
to stay in freezer part, therefore the freezer will be more colder.
2. Adjust it to right hand side position that will allow more cold air to go up to
refrigerator compartment which will be more colder.
To balance the air flow , please put the knob in the middle position for
normal working condition. If the fridge part isn’t cold enough, please adjust
it close to right hand side position. Please don’t put it on Very left position
for long time to avoid building up too much ice in freezer.
Failure alarm
When the indicator light of Mode 2 or Mode 5 keeps flashing, it indicates the
refrigerator failure. Please contact customer service for assistance.
Humidity control
The crisper has a Humidity control on the front, set it to high(three water drop
symbol on left position) will keep more moisture inside and set it to Low(one water
drop symbol on right position) position will reduce the moisture.
If too much moisture or condensation under the crisper glass cover. Please put leafy
greens, like arugula, spinach, and herbs into a plastic or paper bag before putting
the crisper.
Notes
Large quantities of food stored in the appliance or directly in front of the air vent
will hinder the cooling efficiency of the appliance as this can affect the airflow.
Change the thermostat settings in the fridge or freezer compartment, allow 6 hours
for temperature to stabilize between adjustments.
Do not keep opening and closing the door which will increase the temperature in
the unit.
Please note different sections of refrigerator compartment may be warmer
or cooler than others – typically the back wall and bottom lowest shelf
will be the coolest, the top door rack will be the warmest. To avoid frost
bite, please don’t put raw vegetables too close to the coolest area.
Loading ...
Loading ...
Loading ...