Loading ...
Loading ...
Loading ...
7
Stereo-Link™: Linking Two Speakers Together Wirelessly
1. Power on both Party Float speakers. You will hear "Power on, Bluetooth pairing."
Note: In order to use Stereo-Link Mode, you cannot have a Bluetooth device connected.
If one speaker is connected to a Bluetooth device, break the connection by pressing and
holding the Bluetooth button.
2. With no Bluetooth device connected (blue LEDs on both speakers will blink), on one Party
Float press and hold – and + for 2 seconds until you hear a short 3-tone melody and
"Bluetooth pairing;" repeat this for the second Party Float. The melody will indicate the
Party Floats are searching for each other to link as their blue LEDs begin to blink fast.
3. Wait about 10-30 seconds for the Party Floats to find each other. Once “linked,” one
Party Float will say “Bluetooth connected” (if the voice prompts are enabled). Now that
the two speakers are “linked,” one speaker’s blue LED will blink fast, while the other
speaker’s blue LED will blink slowly to indicate it’s ready to pair the stereo-linked
speakers to your Bluetooth device (e.g., your phone).
4. When the Party Floats are wirelessly linked to play in stereo, navigate to your Bluetooth
device’s setup screen, find Party Float and connect.
5. Once your smartphone is paired, you will hear “Bluetooth connected” (if the voice
prompts are enabled) and audio can now play out of both speakers in stereo.
• In Stereo-Link Mode: UI Controls on both speakers will be active.
• To exit Stereo-Link Mode, press and hold – and + until the speaker goes back into
pairing mode, saying “Bluetooth pairing."
• In Stereo-Link Mode, press Power to turn off both speakers.
Note: If a Party Float is in Stereo-Link Mode when you power it off, it will be in Stereo-Link the
next time you power it on. That means if two Party Floats are linked when you power them off,
they will automatically link when you power them on as long as they are in close range of each
other and powered on within 15 seconds of each other.
Note: If a Party Float is in Stereo-Link Mode when you power it off, when you power it back
on, it will revert back to single mode, and be ready to pair to a Bluetooth device if it does not
find another Party Float to link to within 15 seconds. To re-enter Stereo-Link Mode, follow
Steps 1–5 above.
Using the Pong Tray
To attach the included pong tray, align the protrusions on the bottom of the tray with the
cupholders on Party Float. Gently push the tray in until it is fully inserted into the cupholders.
Note: When using the cupholders or pong tray, inserting heavy containers may cause Party
Float to tip slightly.
Loading ...
Loading ...
Loading ...