Crockpot CSC031 Crock-Pot Slow Cooker

INSTRUCTION MANUAL - Page 6

For CSC031.

PDF File Manual, 8 pages, Read Online | Download pdf file

CSC031 photo
Loading ...
Loading ...
Loading ...
6
FISH:
Fish cooks quickly and should be added at the end of the cooking cycle during the last fifteen minutes to one hour of
cooking.
LIQUID:
It might appear that slow cooker recipes only have a small quantity of liquid in them but the slow cooking process
differs from other cooking methods in that the added liquid in the recipe will almost double during the cooking time. If
you are adapting a recipe for your slow cooker from a conventional recipe, please reduce the amount of liquid before
cooking.
CLEANING
ALWAYS unplug your slow cooker from the electrical outlet, and allow it to cool before cleaning.
CAUTION: Never immerse the heating base, power cord or plug in water or any other liquid.
The lid must be detached from the heating base before the stoneware can be removed.
The lid and stoneware can be washed in the dishwasher or with hot, soapy water. Do not use abrasive cleaning compounds
or scouring pads. A cloth, sponge, or rubber spatula will usually remove residue. To remove water spots and other stains,
use a non-abrasive cleaner or vinegar.
As with most fine ceramic and glass, the stoneware and lid will not withstand sudden temperature changes. Do not wash or
immerse the stoneware or lid in cold water when they are hot.
The outside of the heating base may be cleaned with a soft cloth and warm, soapy water. Wipe dry. Do not use abrasive
cleaners.
No other servicing should be performed.
NOTE: After cleaning by hand allow the stoneware to air dry before storing.
FITTING A PLUG
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed and
replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted.
The appliance must not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord
and an appropriate plug fitted as detailed. If you remove the plug it must not be
connected to a 13 amp socket and the plug must be disposed of immediately.
If the terminals in the plug are not marked or if you are unsure about the installation
of the plug please contact a qualified electrician.
Blue
(Neutral)
Brown
(Live)
Fuse
Green/Yellow
(Earth)
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Ensure that the outer sheath of
the cable is firmly held by the cord grip
3A
Loading ...
Loading ...