Loading ...
Read the instructions, keep them safe, pass them on if you pass the kettle on.
Remove all packaging before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been
supervised/instructed and understand the
hazards involved. Children shall not play with the
appliance.
Cleaning and user maintenance shall not be done
by children unless they are older than 8 and
supervised.
Keep the appliance and cable out of reach of
children under 8 years.
h Parts of the appliance will get hot during use.
If you overll, the kettle may spit boiling water.
Use the kettle only with the stand supplied (and
vice versa).
If the cable is damaged, it must be replaced by
the manufacturer, its service agent, or someone
similarly qualied, to avoid hazard.
Avoid spillage on the stand/connector.
The surface of the heating element is subject to
residual heat after use.
Use the appliance according to these instructions.
Any misuse may cause potential injury, electric
shock or other hazards.
This appliance is intended to be used in household
and similar applications such as:
• sta kitchen areas in shops, oces and other
working environments;
• by clients in hotels, motels and other
residential type environments;
• bed and breakfast type environments;
• farm houses.
b Do not use this appliance near bathtubs, showers, basins or
other vessels containing water.
• Don’t use the kettle for any purpose other than heating water.
• Don’t operate the appliance if it’s damaged or malfunctions.
PARTS
1. Filter
2. Lid
3. Lid release
4. Water level gauge
5. Switch
6. Stand
BEFORE FIRST USE
Fill to max, boil, discard the water, then rinse. Do this twice to
remove any manufacturing dust, etc.
FILLING
1. Remove the lid.
2. Fill with at least 1 cup of water, but not above max.
3. If you want only 1, 2, or 3 cups of water, ll to the 1, 2, or 3 marks
inside the kettle.
4. Ret the lid.
USING YOUR KETTLE
1. Put the stand on a stable, level surface. Wind excess cable
beneath the stand.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to I. The light will come on and the kettle will
start to heat.
5. When it boils, the kettle will switch o.
6. To switch o manually, move the switch to O, or simply lift the
kettle o the stand.
GENERAL
When you lift the kettle, you may see moisture on the stand. Don’t worry, it’s
the steam used to switch o the kettle which is allowed to escape via vents
under the kettle.
h b
e
f
k
max
i
j
g
3
2
1
2
A