Loading ...
Loading ...
Loading ...
28
7.2 Cleaning the sensor
There are dampness sensors in the
dryer that detect whether the laundry
is dry or not.
To clean the sensors:
• Open the loading door of the
dryer.
• Allow the machine to cool down
if it is still hot due to the drying
process.
• Wipe the metal surfaces of
the sensor with a soft cloth,
dampened with vinegar and dry
them.
C
Clean metal surfaces of the
sensors 4 times a year.
C
Do not use metal tools
when cleaning metal
surfaces of the sensors.
A
Never use solvents,
cleaning agents or similar
substances for cleaning
due to the risk of fire and
explosion!
7.3 Draining the water tank
Dampness of the laundry is removed
and condensed during drying process
and the water that arise accumulates
in the water tank. Drain the water
tank after each drying cycle.
A
Condensed water is not
drinkable!
A
Never remove the water
tank when the program is
running!
If you forget to drain the water tank,
the machine will stop during the
subsequent drying cycles when the
water tank is full and the Water Tank
warning symbol will flash. If this is
the case, drain the water tank and
press Start / Pause button to resume
the drying cycle.
To drain the water tank:
Pull the drawer and remove the
water tank carefully.
• Drain the water in the tank.
Loading ...
Loading ...
Loading ...