Loading ...
Loading ...
Loading ...
26 27
CARING FOR YOUR BREWER
3. Pull out the Pod Holder Assembly (1) and
Base (2).
CLEANING THE POD HOLDER
1. Lift the Handle.
2. Push up while grabbing the sides of the
Pod Holder Assembly. Pull away from
the brewer.
CAUTION: Sharp needles. Do not put fingers in chamber.
4. Press the release buttons on both sides
of the Pod Holder Assembly.
5. Separate the Pod Holder from
the Housing.
6. Clean the Pod Holder (1), Housing (2),
and Base (3) with a damp, soapy,
lint-free, non-abrasive cloth and
rinse thoroughly.
8. Place the Base, then the Pod Holder
Assembly into the Brew Head.
Lower the Handle.
CAUTION: Sharp needles. Do not put fingers in chamber.
8. After all pieces are cleaned, reassemble
the Pod Holder Assembly by inserting the
Pod Holder back into the Housing.
2
|
TIPS & MAINTENANCE
Loading ...
Loading ...
Loading ...