Loading ...
Loading ...
Loading ...
33 User Manual
Humidification and Dehumidification
This thermostat can be used to control the level of
humidification and dehumidification. Humidification can be
controlled manually from the thermostat or automatically
when a Braeburn
®
outdoor remote sensor is installed and
configured in the Installer Settings (See Installer Manual).
To view the current humidity level at the thermostat, touch the
HUMIDITY TouchPad
(Figure 1). If humidification and dehumidification
are not enabled, you will only see the current humidity level.
If humidification is enabled you will see the current humidity
level along with the humidification set point (Figure 2). Press the
SpeedBar
®
up or down to adjust the humidification set point.
If dehumidification control is enabled, the air conditioning system
can be used to reduce humidity during the cooling season. If the
room humidity level is above the dehumidification set point, the
air conditioning system may run until the room temperature is
several degrees lower than the cooling set point, or until the
room humidity level reaches the dehumidification set point
(which ever comes first).
Figure 1
Figure 2
Figure 1
Figure 2
Loading ...
Loading ...
Loading ...