Loading ...
Loading ...
Loading ...
11
2. Fit the auxiliary handle into position and align the holes.
Fix by the bolt and the handle knob. Tighten the handle
knob to secure (Fig. 4).
Fitting the Safety Guard
mWARNING! The safety guard must be properly installed.
The safety guard provides partial protection from the risk of
thrown objects to the operator and other bystanders.
1. Use a screw driver to remove the 4 safety guard screws
that pre-assembled on the motor housing (Fig. 5).
Retain the screws.
2. Place the safety guard over the motor housing as shown.
Align the holes. Fix with the original 4 safety guard screws.
Tighten to secure (Fig. 6).
Installing the Storage Compartment
1. To store your grass blades easily, just simply snap the
storage compartment onto the pole of the trimmer and
edger. Be sure that the storage compartment is right side
up to prevent blades from falling out (Fig. 7).
2. The trimmer plate (or SharperBlade
™
mini trimmer blade)
can be snapped directly onto the compartment for safe
storage, when not in use. (Fig. 8-9).
Auxiliary handle
Handle knob
Bolt
Fig. 4
Fig. 5
Safety guard screws
Motor housing
Safety guard
Fig. 6
Safety guard
screws
Motor
housing
Storage
compartment
Pole
Fig. 7
Trimmer
plate
Pole
Storage
compartment
Fig. 8
Loading ...
Loading ...
Loading ...