Loading ...
Loading ...
Loading ...
13
EN
4. Installation
Refer to the nearest Authorized
Service Agent for installation of
the product. To make the product
ready for use, make sure that the
electricity and water drainage
systems are appropriate by reading
the information/instructions given
in the user manual before calling
the Authorized Service Agent. If they
are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
C
Preparation of the product's
location as well as the
electrical, clean water and
waste water installations
is under customer's
responsibility.
B
CAUTION: Installation and
electrical connections of the
product must be performed
by the Authorized Service
Agent. Manufacturer
shall not be held liable for
damages that may arise
from procedures carried out
by unauthorized persons.
A
CAUTION: Prior to
installation, visually check
if the product has any
defects on it. If so, do not
have it installed. Damaged
products cause risks for
your safety.
4.1 Appropriate installation
location
• Install the product on a stable
and level surface.
• Dryer is heavy. Do not move it by
yourself.
• Operate your product in a
well ventilated, dust-free
environment.
• Do not block the air ducts in
front of and under the product
with materials such as long pile
rugs, wooden blocks and bands.
• Do not install the product behind
a door with a lock, sliding door
or a hinged door which can
strike the product.
• Once the product is installed, it
should stay at the same place
where its connections have
been made. When installing
the product, make sure that the
rear wall of it does not touch
anywhere (tap, socket, etc.).
Also pay attention to select an
installation location which you
will not be required to change
afterwards.
• Place the product at least 1.5 cm
away from the edges of other
furniture.
• The rear surface of the tumble
dryer shall be placed against a
wall.
B
CAUTION: Do not place the
product on top of the power
cord.
Loading ...
Loading ...
Loading ...