Loading ...
Loading ...
Loading ...
Port：
Displays the port number.
Untagged
：
Click the check box to configure the egress rule of the traffic
on this port as untagged. The switch dro
ps the tag header
before sending the packet.
Tagged:
Click the check box to configure the egress rule of the traffic
on this port as tagged. The switch adds the tag header before
sending the packet.
Not Member:
Click the check box to exclude the port from the current VLAN.
7.4 802.1Q PVID Setting
PVID (Port Vlan ID) is the default VID of the port. When the switch receives an un-VLAN-tagged
packet, it will add a VLAN tag to the packet according to the PVID of its received port and
forward the packets.
When creating VLANs, the PVID of each port, indicating the default VLAN to which the port
belongs, is an important parameter with the following two purposes:
（1） When the switch receives an un-VLAN-tagged packet, it will add a VLAN tag to the
packet according to the PVID of its received port
（2） PVID determines the default broadcast domain of the port, i.e. when the port receives
UL packets or broadcast packets, the port will broadcast the packets in its default
VLAN.
On this page you can configure PVID of the specified port. By default, the PVID of all ports is 1.
Choose the menu VLAN→802.1Q PVID Setting to load the following page.
Figure 7-6
802.1Q VLAN PVID Setting
The following entries are displayed on this screen:
802.1Q VLAN PVID Setting
32
Loading ...
Loading ...
Loading ...